Insydeh20 setup utility hp boot from usb
Depending on the manufacturer of your system, you can press the DEL key, the F2 key or another key that is listed on screen to access the system BIOS. Here is how you can check your BIOS settings.Īt the moment of turning your computer on, you will see an option to enter SETUP. In case any malfunctions with UEFI secure boot (if your machine does not boot after you set up boot priority as it is described above), you should check that BIOS boot is enabled (Legacy mode), or UEFI is disabled. Some modern computers use new advanced UEFI 圆4 or x86 secure boot approach instead of the standard BIOS LiveCD fully supports UEFI secure boot on both 32-bit & 64-bit systems, and will boot up the machine automatically.
#Insydeh20 setup utility hp boot from usb how to#
If you read these instructions and you are not sure how to change a setting, it is better to leave it as the default setting. Please follow the BIOS guide provided with your computer motherboard. Note: Using an incorrect BIOS setting can cause a system malfunction. To boot from the selected device, press ENTER. Use the up and down arrows to select CD-ROM. When the computer starts to boot up, after the manufacturer's ID screen, press F12 several times. To set boot priority using a device selection menu: The example below uses a Dell system board. Some computer manufacturers allow you to select the device that contains the boot sequence from a special device selection menu. The computer will restart with the changed settings. Move the USB device to the top of the list of hard drives.Expand the hard drive device to display all hard drives.Move the hard drive device to the top of the boot sequence list.To give a USB device boot sequence priority over the hard drive, do the following: To give a CD or DVD drive boot sequence priority over the hard drive, move it to the first position in the list. System devices will appear in order of priority. Use the arrow keys to select the BOOT tab. Depending on the BIOS manufacturer, a menu may appear. Start the computer and press ESC, F1, F2, F8, F10 or Del during the initial startup screen. Use the keyboard arrow keys to move around the screen.īefore you set boot priority for a USB device, plug the device into a USB port. While you are in the BIOS Setup Utility, you will not be able to use your mouse. The first device in the order list has the first boot priority.įor example, to boot from a CD-ROM drive instead of a hard drive, place the CD-ROM drive ahead of it in the priority list. You can configure the order that your computer searches these physical devices for the boot sequence.
A typical method to access the BIOS settings screen is to press ESC, F1, F2, F8, F10 or Del during the boot sequence.īIOS settings allow you to run a boot sequence from a removable disk, a hard drive, a CD-ROM drive or an external device. BIOS BootīIOS (Basic Input Output Subsystem) is a programmable chip that controls how information being passed to various devices in the computer system. To boot from a CD, DVD or USB device, make sure that the device has the boot sequence priority over the hard drive.